× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

Connect with your car in an entirely new way!  Incorporating features available in products that sell for 3 times the price, this is the Swiss Army Knife of Performance Data, with design and integration that enhance the clean lines of your interior.

Compliment  and  accentuate your MINI’S OEM interior, by providing an extended cache of metrics that caters to the discerning driver.

Specifically designed to support the 2007+ R55,R56,R57,R58,R59 platforms. Reads all data directly including Boost directly from the Diagnostics Port, for fast plug and play install!

Monitor anything from AFR to pressure or even Flow Rate.  Your car wants to talk to you! The question is-are you ready to listen?

Fits the following models:

  • 2007-2013 R56 MINI Cooper S Hardtop
  • 2008-2014 R55 MINI Cooper S Clubman
  • 2009-2015 R57 MINI Cooper S Convertible
  • 2012-2015 R58 MINI Cooper S Coupe
  • 2012-2015 R59 MINI Cooper S Roadster.

P3 V3 Gauge Features

  • Plug and Play Install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly 

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your car’s diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your fingertips.  We’ve even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
  • Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

P3Cars:

At P3Cars we've been producing the highest quality instruments for some of the world's finest cars since 2009.  Our fundamental goal is to retain the gorgeous design of the OEM interior, and also accentuate it by providing an extended cache of metrics to the discerning driver.  A new kind of interface was created, and new ways of thinking brought about a revolutionary new product.

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your cars diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your finger tips.  We even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.  Your car wants to talk to you.  Are you ready to listen?

See this installation video:

 

Here is another video showing all the modes:

Here is a video produced by an end-user:

 

P3Cars:

At P3Cars we've been producing the highest quality instruments for some of the world's finest cars since 2009.  Our fundamentoal goal is to retain the gorgeous design of the OEM interior, and also accentuate it by providing an extended cache of metrics to the discerning driver.  A new kind of interface was created, and new ways of thinking brought about a revolutionary new product.

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your cars diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your finger tips.  We even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.  Your car wants to talk to you.  Are you ready to listen?

MINI Cooper P3cars Multiple Function Digital Gauge Kit. Displays data from the OBD Diagnostics Port. Made In the USA!
For you 2nd generation MINI Cooper and Cooper S models including R56 Hardtop R55 Clubman R57 Convertible R58 Coupe R59 Roadster
Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59

Gauge Kit P3cars V3 Digital Gauge Kit MINI Cooper Gen2 R55 R56 R57 R58 R59
Selected: R55-R59 Hardtop Convertible Clubman Coupe Roadster
Part No: G2NMI7700
$472.94
Qty:
Fits the following:
MINI (2002-Current)

Connect with your car in an entirely new way!  Incorporating features available in products that sell for 3 times the price, this is the Swiss Army Knife of Performance Data, with design and integration that enhance the clean lines of your interior.

Compliment  and  accentuate your MINI’S OEM interior, by providing an extended cache of metrics that caters to the discerning driver. The display mounts into the existing dash vent for a 'stock look'.

Specifically designed to support the 2011-2016 R60 Countryman platform. Reads all data directly including Boost directly from the Diagnostics Port, for fast plug and play install!

Monitor anything from AFR to pressure or even Flow Rate.  Your car wants to talk to you! The question is-are you ready to listen?

Fits the following models:

  • 2011-2016 R60 MINI Cooper S Countryman
  • 2013-2016 R61 MINI Cooper S Paceman

P3 V3 Gauge Features

  • Plug and Play Install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly 

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your car’s diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your fingertips.  We’ve even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
  • Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

P3Cars:

At P3Cars we've been producing the highest quality instruments for some of the world's finest cars since 2009.  Our fundamental goal is to retain the gorgeous design of the OEM interior, and also accentuate it by providing an extended cache of metrics to the discerning driver.  A new kind of interface was created, and new ways of thinking brought about a revolutionary new product.

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your cars diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your finger tips.  We even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.  Your car wants to talk to you.  Are you ready to listen?

 

 

Connect with your car in an entirely new way!  Incorporating features available in products that sell for 3 times the price, this is the Swiss Army Knife of Performance Data, with design and integration that enhance the clean lines of your interior.

Compliment  and  accentuate your MINI’S OEM interior, by providing an extended cache of metrics that caters to the discerning driver.

Specifically designed to support the 2007+ R55,R56,R57,R58,R59 platforms. Reads all data directly including Boost directly from the Diagnostics Port, for fast plug and play install!

Monitor anything from AFR to pressure or even Flow Rate.  Your car wants to talk to you! The question is-are you ready to listen?

Fits the following models:

  • 2007-2013 R56 MINI Cooper S Hardtop
  • 2008-2014 R55 MINI Cooper S Clubman
  • 2009-2015 R57 MINI Cooper S Convertible
  • 2012-2015 R58 MINI Cooper S Coupe
  • 2012-2015 R59 MINI Cooper S Roadster.

P3 V3 Gauge Features

  • Plug and Play Install - plugs directly into your OBD2 port
  • OEM Integration - installs in your vent for a sleek install while retaining air flow
  • Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analog boost sensor
  • Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly 

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your car’s diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your fingertips.  We’ve even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.

P3 V3 Gauge Readouts

  • Boost (through OBD2 port using OEM sensors or with P3 analog boost sensor)
  • Coolant temperature
  • Air/Fuel ratio (can be read in AFR or Lambda)
  • Vehicle speed (can be calibrated in 1% increments from -9% to +20%)
  • Intake air temperature
  • Throttle angle
  • Ignition timing
  • Engine RPM Exhaust gas temperature
  • Battery voltage
  • Programmable shift light
  • Analog input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor
  • Analog input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor
  • Acceleration timers (0-60mph/0-100mph/60-130mph)
  • Braking timers (60-0mph/100-0mph)

You asked, we answered. The P3 V3 Gauge adds even more user control to what the OBD2 Multi-Gauge already offered. Read DTCs on command, remove pids that you don't care to see, configure units settings of individual measurements, calibrate your vehicle speed, read AFR in Lambda.

There when you need it, hidden when you don't. No more bulky pillar or column pods... No more squinting to read tiny pixelated screens... While retaining the OEM plus design that blends into your interior, the P3 V3 packs a punch with it's bold, bright display that allows you to pick up info at a glance.

Hot or Cold? No problem! Even though the P3 V3 installs in your air vent, we keep in mind that you need that heat and A/C while designing each gauge.

Electronics in a harsh climate? We've got that covered too. We've torture-tested our gauges to the extreme. From frozen solid at -94 F to physically melting at hundreds of degrees, our gauges function far beyond the limits of the in-car environment. 

P3Cars:

At P3Cars we've been producing the highest quality instruments for some of the world's finest cars since 2009.  Our fundamental goal is to retain the gorgeous design of the OEM interior, and also accentuate it by providing an extended cache of metrics to the discerning driver.  A new kind of interface was created, and new ways of thinking brought about a revolutionary new product.

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your cars diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your finger tips.  We even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.  Your car wants to talk to you.  Are you ready to listen?

See this installation video:

 

Here is another video showing all the modes:

Here is a video produced by an end-user:

 

P3Cars:

At P3Cars we've been producing the highest quality instruments for some of the world's finest cars since 2009.  Our fundamentoal goal is to retain the gorgeous design of the OEM interior, and also accentuate it by providing an extended cache of metrics to the discerning driver.  A new kind of interface was created, and new ways of thinking brought about a revolutionary new product.

Our gauge is a simple 'plug and play' device with a revolutionary interface all designed and built here in the USA.  Simply plug one of our VIDI units into your cars diagnostic port and you are ready to go.  It is that simple. Boost, all available temps like coolant and EGT, a 0-60 timer, shift light, timing, and even battery voltage area all right at your finger tips.  We even included a code read and reset function for engine fault codes.  What's more is our VIDI is expandable, having 3 additional 0-5v linear inputs for those of you who take your cars even more seriously.  Monitor anything from AFR to pressure or even flow rate.  Your car wants to talk to you.  Are you ready to listen?

 
 
Question:
How do you change what your viewing on display?
Answer:
Tapping the right button cycles thru the readouts.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
 
 
Question:
What is the install on this? Is the wire harness hidden?
Answer:
The gauge display goes into the vent opening to the right of the steering wheel and the wiring is hidden behind the dash trim all the way down to the obd port.

Mini Mania Tech Team

The MINI Cooper Parts and Accessories Experts

 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...