Bore tolerance 1098 +20
Created by: exiledbrit
Orig. Posting Date | User Name | Edit Date |
Apr 25, 2017 05:17PM | Spank | |
Apr 25, 2017 03:29PM | exiledbrit |
Total posts: 6349
Last post: Oct 22, 2023 Member since:Mar 9, 1999
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
you're good
Total posts: 58
Last post: Aug 8, 2017 Member since:Jul 25, 2016
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
I borrowed a bore measurement tool which is OK but only up to 3 decimal points. My pistons are +20 and the book says the bore should measure 2.5624 to 2.5646 All bores measure the same at approx. 2.568 from top to piston at BDC with no oval wear.....I don't know how many miles have been done since the new pistons were fitted but as the car has only done a total of 75K miles, wear should not be too bad. Any comments on this measurement? Four thousandths of an inch doesn't sound a big problem but (?).
I will try to borrow a more accurate tool
Steve
I will try to borrow a more accurate tool
Steve