Created by: | Orig. Posting Date | User Name | Edit Date |
| Jul 15, 2023 05:00AM | 6464s | Edited: Jul 15, 2023 05:01AM |
| Jul 15, 2023 02:55AM | Willie_B | |
| Jul 14, 2023 08:46PM | Thami |
Posted:
Jul 15, 2023
05:00AM
Edited:
Jul 15, 2023
05:01AM
|
Total posts: 501
Last post: Apr 19, 2024 Member since:Jan 25, 2017
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
bmw mini they don't know anything else
|
|
Total posts: 2525
Last post: Apr 27, 2024 Member since:Dec 1, 2002
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
|
There have been 60+ years of mini production. It would really help to know your cars year and model to be able to help.
"How can anything bigger be mini?"
|
|
Total posts: 1
Last post: Jul 14, 2023 Member since:Jul 14, 2023
|
Cars in Garage: 0
Photos: 0 WorkBench Posts: 0 |
Mini Coopers hi
I recently bought a mini few months back and it was firing up nicely except that it had a hard time keeping the temp gauge in a right place. Took the head and engine to engeenering and did a light skim. Now with everything back together, the car won't fire up. There's no spark and no fuel yet the pump does prime. Oh I've checked the injector harness using a test light and one wire has voltage and the signal dont. Same as ignition coil, these voltage on the middle red wire and the other 2 on the sides no. On inpa it complains about primary circuit for coil ignition only. But I can see that ecu won't supply ground for can to start. Anyone who encountered such a problem? Oh I did check fuses and relays everything seems ok. I have even swapped the relays just to make sure.
I recently bought a mini few months back and it was firing up nicely except that it had a hard time keeping the temp gauge in a right place. Took the head and engine to engeenering and did a light skim. Now with everything back together, the car won't fire up. There's no spark and no fuel yet the pump does prime. Oh I've checked the injector harness using a test light and one wire has voltage and the signal dont. Same as ignition coil, these voltage on the middle red wire and the other 2 on the sides no. On inpa it complains about primary circuit for coil ignition only. But I can see that ecu won't supply ground for can to start. Anyone who encountered such a problem? Oh I did check fuses and relays everything seems ok. I have even swapped the relays just to make sure.
