× 1-800-946-2642 Home My Account Social / Forum Articles Contact My Cart
Shop Now
Select Your Car Type Sale Items Clearance Items New Items

NM Engineering exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Featuring a proprietary muffler design with an improved DRC System and large diameter metric sized tubing and low restriction stainless steel mufflers these Lightweight Exhaust are carefully designed to reduce weight, provide the famous Mini sound AND meets State noise restriction standards.

Features polished muffler and tips, CNC mandrel bends, precise fit flanges and mounting hangers are standard on every NM exhaust system. 10~14 HP gain.

Fits the following models:

  • 2014-2021 F56 MINI Cooper S Hardtop
  • 2015-2021 F55 MINI Cooper S Hardtop 4-Door

Select model.

NOTES:

  • Fits JCW models
  • For North American models only

About The DRC System

NM Engineering F56 Downpipe-Back Exhaust System features Dual Resonance Chamber (DRC) muffler and resonator. It is a proprietary muffler design where it offers two different sound levels and characteristics depending on boost level and throttle input. At partial throttle the system will give round and deep sound level. Passengers can converse comfortably without any issue. At full throttle the sound level increases paired with raspier exhaust note as well as enhancing the famous MINI exhaust popping (burble) note at deceleration.

This system starts right after the downpipe at the factory v-band clamp. Complete bolt on system without any cutting. The system features 70mm tubing with dual 100mm (4") polished tips.

NOTE: This exhaust system for off road use only.

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop

Exhaust Nm Cat Back Upgrade | Gen3 Mini Cooper S F55 F56 Hardtop
Alternate Products
Mini Cooper S Exhaust Borla Performance Gen3 F56 F57
Mini Cooper S Exhaust Borla Performance Gen3 F56 F57
MINI Cooper Quicksilver Performance Exhaust Gen3 F55 F56 F57
MINI Cooper Quicksilver Performance Exhaust Gen3 F55 F56 F57

NM Engineering Down-Pipe back Exhaust Performance Upgrade.

NM Engineering exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Featuring a proprietary muffler design with an improved DRC System and large diameter metric sized tubing and low restriction stainless steel mufflers these Lightweight Exhaust are carefully designed to reduce weight, provide the famous Mini sound AND meets State noise restriction standards.

Features polished muffler and tips, CNC mandrel bends, precise fit flanges and mounting hangers are standard on every NM exhaust system. 10~14 HP gain.

Fits the following models:

  • 2015-2020 F55 MINI Cooper S Hardtop 4-Door

NOTE: For North Amercian models only

About The DRC System

NM Engineering F56 Downpipe-Back Exhaust System features Dual Resonance Chamber (DRC) muffler and resonator. It is a proprietary muffler design where it offers two different sound levels and characteristics depending on boost level and throttle input. At partial throttle the system will give round and deep sound level. Passengers can converse comfortably without any issue. At full throttle the sound level increases paired with raspier exhaust note as well as enhancing the famous MINI exhaust popping (burble) note at deceleration.

This system starts right after the downpipe at the factory v-band clamp. Complete bolt on system without any cutting. The system features 70mm tubing with dual 100mm (4") polished tips.

NOTE: This exhaust system for off road use only.

Performance Exhaust for the F54 Clubman and F60 Countryman from NM Engineering known for quality performance upgrades for the MINI!

NM exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Large diameter sized tubing and low restriction stainless steel mufflers are carefully designed to reduce weight and meet State noise restriction standards. Polished muffler and tips, CNC mandrel bends are standard on every NM exhaust system. 10~14 HP gain.

Fits the following models:

2016-2021 F54 MINI Cooper S Clubman
2017-2021 F60 MINI Cooper S Countryman

This system starts right after the downpipe at the factory v-band clamp. Complete bolt on system without any cutting. The system features 76mm (3inch) tubing with dual 100mm (4") polished tips.

Notes:

  • FITS NORTH AMERICA MODELS ONLY!
  • Some models require minor heat shield tweaking.
  • For off road or competition use only.

See NM Exhaust installation notes here.



NM Engineering exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Featuring a proprietary muffler design with an improved DRC System and large diameter metric sized tubing and low restriction stainless steel mufflers these Lightweight Exhaust  are carefully designed to reduce weight, provide the famous Mini sound  AND meets State noise restriction standards.

Features polished muffler and tips, CNC mandrel bends, precise fit flanges and mounting hangers are standard on every NM exhaust system. 10~14 HP gain.

Fits the following models:

  • 2014-2021 F56 MINI Cooper S Hardtop

NOTES:

  • Fits JCW models
  • For North American models only

About The DRC System

NM Engineering F56 Downpipe-Back Exhaust System features Dual Resonance Chamber (DRC) muffler and resonator. It is a proprietary muffler design where it offers two different sound levels and characteristics depending on boost level and throttle input. At partial throttle the system will give round and deep sound level. Passengers can converse comfortably without any issue. At full throttle the sound level increases paired with raspier exhaust note as well as enhancing the famous MINI exhaust popping (burble) note at deceleration.

This system starts right after the downpipe at the factory v-band clamp. Complete bolt on system without any cutting. The system features 70mm tubing with dual 100mm (4") polished tips.

NOTE:  This exhaust system for off road use only.

NM Engineering exhaust systems are constructed from 100% aerospace quality T304 stainless steel – inside and out. Featuring a proprietary muffler design with an improved DRC System and large diameter metric sized tubing and low restriction stainless steel mufflers these Lightweight Exhaust are carefully designed to reduce weight, provide the famous Mini sound AND meets State noise restriction standards.

Features polished muffler and tips, CNC mandrel bends, precise fit flanges and mounting hangers are standard on every NM exhaust system. 10~14 HP gain.

Fits the following models:

  • 2014-2021 F56 MINI Cooper S Hardtop
  • 2015-2021 F55 MINI Cooper S Hardtop 4-Door

Select model.

NOTES:

  • Fits JCW models
  • For North American models only

About The DRC System

NM Engineering F56 Downpipe-Back Exhaust System features Dual Resonance Chamber (DRC) muffler and resonator. It is a proprietary muffler design where it offers two different sound levels and characteristics depending on boost level and throttle input. At partial throttle the system will give round and deep sound level. Passengers can converse comfortably without any issue. At full throttle the sound level increases paired with raspier exhaust note as well as enhancing the famous MINI exhaust popping (burble) note at deceleration.

This system starts right after the downpipe at the factory v-band clamp. Complete bolt on system without any cutting. The system features 70mm tubing with dual 100mm (4") polished tips.

NOTE: This exhaust system for off road use only.

 
 
Question:
Hello, I just had a quick question regarding the nm performance exhaust for my 2015 f56 Mini Cooper, part #G3NME2030. I just wanted to confirm that this exhaust is in fact a cat back upgrade, meaning the catalytic converter is not removed for this upgrade, correct? Thank you
Answer:
That is a down pipe back kit, so it would replace the cat.
 
 
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Related Technical Articles:
MINI Cooper and Cooper S Performance Exhausts | Gen1, Gen2, Gen3
Created: January 08, 2020
Find and shop for MINI Cooper Performance Exhausts | Borla Exhausts, QuickSilver Exhausts, Dinan Exhausts, NM Exhausts, Remus Exhausts
Performance Exhaust Upgrades for Gen3 F54 F55 F56 F57 F60
Created: September 06, 2017
Performance and Cat Back Exhaust systems for your Gen 3 F54 F55 F56 F57 F60 MINI Cooper offer better flow with reduced back pressure for improved performance. These systems typically offer a lower deeper tone with a slight increase in sound volume. Some of these systems install at the front flange, the others are spliced in after the secondary catalytic converter or resonator.